In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Make sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made wooden dog crates for sale sure that it is secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are level and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to be certain it’s secure on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.